Water Heater Repair Huntington Beach's BlogHuntington Beach Homeowner advice and maintenance tips for water heaters.
Statistically, the water heater in ones Huntington Beach house will operate without any significant disaster; nevertheless, the opportunity it still there which is why one should understand the safety and security info in this post. We want all our clients and readers to be familiar with these hot water heater precaution so they will have a safe residence.
Significant Reasons a Water Heater Will Have a Significant Breakdown
Improper change of temperature and pressure relief valve settings
Temperature and pressure relief settings are modified
Unqualified individuals execute maintenance on the hot water heater
Lack of regular upkeep by a specialist
How To Lessen Potential Catastrophic Water Heater Issues
Possibly the most essential action a home owner can do to make sure ones hot water heater is operating securely is to have a professional inspect it regularly. A plumbing specialist will have the ability to see to it all the safety components of the water heater are working as they should, and to make certain it is functioning as energy successfully as possible too.
The initial safety upkeep action property owners can do is to examine the temperature and pressure relief valve a minimum of yearly. It needs to open with little effort and properly snap tight itself when it shuts without leaking water once it is closed once more. If it does not open easily, and if it does not seal snugly so water does not leak out, it will have to be changed. It is a simple and affordable replacement procedure. However, one that is essential, for this component makes certain the pressure inside the hot water heater storage tank does not boost to the point of exploding.
Some suggest to replace the T&P valve every 3 years, regardless of what the condition, for precaution.
It is essential for property owners to be familiar with the temperature level setting of the water heater as well. We can not think of any kind of reason why it ought to be set higher than 120 degrees, and even this will be above most individuals will require. Higher than this temperature level, one risks skin burns from the scalding temperature. If there are youngsters or elderly people in the house, additional care needs to be taken with the maximum water temperature.
With water heaters often times housed in a garage where lots of objects are stored and/or children could play, the temperature level setting dial may obtain bumped by accident and no person understands it. If the hot water within the residence seems hotter than normal, check the temperature level setting immediately. If the setting is bumped too high, it can cause an unwanted of pressure inside the water tank too, creating a hazardous situation.
Infants and small children may not be able to get away from water that may be too hot, and maintaining a constant thermostat setting can help control the water temperature throughout your home—preventing it from getting too high. (read more)
One more reason why ones water comes to be hotter than normal, if the temperature level setting has not been altered, is that the thermostat is not working effectively. It can additionally be the case if the water is colder compared to normal too. If when altering the temperature does not have much of an effect, there is possibly glitch with the thermostat and we should look at it.
If one has a gas hot water heater set up, specific care has to be taken to avoid fires. A fire might begin if vapors from combustible products exist. This can easily hold true in a garage or basement, with cleaning supplies, paint, gas containers, or any other item which contains flammable vapors. Please make sure these items are not in the very same location of the water heater.
Knowing carbon monoxide gas leaks is necessary for house owners likewise. It is necessary to have a carbon monoxide detector set up in the home. This dangerous gas can get in the house if a water heater is not properly vented to the outside of the house. This is a major reason to have an accredited professional plumbing set up ones water heating equipment.
Carbon monoxide gas is odorless, which makes it extremely challenging to recognize when it exists in the house. A Carbon Monoxide detector will be able to caution house owners of the leak, but additionally if anybody in the home is presently having problems with dizziness, headaches, chest discomforts, vomiting, mental confusion, these are cautioning signs of a carbon monoxide leak. If one has any one of these symptoms happening, leave the house instantly, go to the hospital, and call a plumbing technician or the gas company to test the house.
If you have any gas-fueled appliances (water heater, furnace, oven, clothes dryer, etc.) in your home, a carbon monoxide detector is imperative. The Consumer Product Safety Commission warns carbon monoxide poisoning kills 200 people each year and causes another 10,000 to need hospital treatment. (read more)
Tankless water heaters should additionally be set up appropriately and can create carbon monoxide leakages as well otherwise correctly vented. It is not just a standard gas water heater issue.
A less dangerous, but still messy circumstance is when a water heater is leaking. A little water, or some condensation can happen around the bottom of the water tank sometimes. Nonetheless, if a consistent stream of water, even if it is just a little continues, definitely call us. This is a sign that something is not right with the heater. A majority of water heater failing happen due to a leak or some size. The earlier we could evaluate for the problem the more likely it will be for us to fix the water heater, and the much less likely a little leak can become a large leak. A big leak can create an expensive cleaning also. A 30-50 gallon water leak in the house is no small task to clean up.
With excellent recognition of how ones hot water heater works, and with exactly what to look for in warning signs that it is not functioning effectively, Huntington Beach home owners may help make sure their residence is secure from a major plumbing emergency.
A leaking water heater might or may not seem to be a substantial issue. However, it does not matter if it is a substantial leak or a minor leak, each one can lead to plenty of destruction for ones household in the shape of water problems. Many times people neglect to comprehend that a tiny leak is often the warning sign of something much bigger that could be starting to happen, or will happen in the near future. In the worse case, that little leak might turn into a big deluge if the water heater is close to totally giving out. No matter the reason, we are here to help with any type of Huntington Beach Hot Water Heater Repair that may be necessary.
Along with water damage to ones residence via a leaking storage tank, one can have health associated concerns with any sort of water leak inside a household. The dampness can lead to mold or mildew growth. People who experience allergies or asthma, this isn’t a fantastic scenario. The EPA alerts that some mold spores are toxic and may result in serious health concerns.
Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow. http://www.cdc.gov/mold/dampness_facts.htm
Hoping that a current water leak will fix on its own and simply go away is something which just doesn’t materialize sad to say. Plumbing leaks simply worsen in time. We have composed a step-by-step list of actions to take in these predicaments.
1. Initially be sure that its the water heater that the leaking water is coming from.
If there is water around where the hot water heater can be found, the leak may not always be originating from it. Examine all water pipes or various other objects close to where the heater is located. Does one have any other appliances near it that could create moisture build-up? If ones heater is located inside a basement, this may very well be the case. It may sometimes be a furnace drain line too, or coming from a water softener.
Initially, wipe up the water and see if it comes back any time in the near future by watching the area periodically. Go over the water heater fully to check if any water is from any of the fittings, T&P valve, or drain valve. If it is fully dry, continue to look at other items and areas close by.
In case nothing else is wet in the general location, place paper towels on the floor in the spot that had been previously wet. Examine each hour or so to be certain the paper towels remain dry. It will be a lot easier to see the paper towels becoming wet then the ground. Following a day if nothing is wet again, there ought to be absolutely nothing to worry about, yet still keep tabs on it for a few days. In cases where water is coming back, and there isn’t any other origin in close proximity that it could be from, we will proceed to the next step here to diagnose the origin of the leak.
Hopefully, it is well known that water and electrical power never go good together, for that reason switch off the power for safety reasons.
For gas water heaters, there ought to be an on/off dial which needs to be placed to the off position. Keep the gas line on at this point still.
For electric heaters, go to the property’s breaker box and turn off the breaker to the water heater.
3. Shut the water supply off
If one is sure that the leak is because of the hot water heater, and if it is relatively sizable, switching the water off will eliminate the possibility of water continuing to fill up the storage tank and leak within ones residence. Once again, with a serious leak coming from the heater, and if the shut off valve is unable to be gotten to or if it happens to be no longer working accurately, go locate and switch off the main shut off valve for the whole property. If one is still uncertain the leak is from the water heater, one will be able to keep the water supply on for now.
Remember to be mindful that water coming from the storage tank shall be hot and will be able to burn ones skin. Most heaters will likely be set to a temperature of at least 120° F, which can lead to first degree burns on contact.
4. Identify the leak’s position
We really do not need to have our Huntington Beach water heater potential customers to self diagnose their leaks in advance of phoning us, particularly if you have a serious water leak situation taking place, but the more one can the more rapidly we can help. The following is a summary of likely explanations why the leak is appearing.
Leaking Water Connections
Take a look at to assure the cold water inlet along with the hot water outlet connections are firm. They are usually located at the top of the storage tank. Make use of a pipe wrench to check they are tight. This is certainly an easy fix if perhaps this is from where the leak is coming.
Leaking T&P Valve
Found on the side of the storage tank is the temperature and pressure relief valve. It is going to also have a drain pipe going down to the bottom from it. The valve controls how much pressure which accumulates in the storage tank. It is going to let water out when it needs to control the pressure. This valve may perhaps be the cause of the leak and might need replacing if it does not remain shut firmly. Glance to check if any water is leaking via the valve. If water is coming from the valve while it is in the closed position, a new valve will be necessary. This is certainly a vital valve of the water heater, and one that really needs to function accurately. However, switching it is not difficult and not costly.
Danny Lipford suggests that:
Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/
First, examine to see if there may perhaps be dirt in the valve. Place a bucket underneath the discharge tube and open up the valve through lifting the tab on the valve. The water that is released may flush the valve out and eliminate any kind of debris that may be in the path.
Other reasons of a T&P valve leak could be high water pressure with the local water system, or from a backflow preventer located close to the water meter.
Leaking Drain Valve
Take a look at the drain valve in the bottoom of the heater. These are generally composed of plastic, and as a result, may break eventually. Be certain that it is shut fully. If the drain valve needs replaced, it is an easy repair.
A drain valve leak could be a result of debris inside the valve. Accomplish this first. Position a bucket beneath the valve and simply turn the dial to open it. Emptying a little water will most likely get rid of the debris. If perhaps right after flushing, it is still leaking, it will need to get replaced.
When the leak is originating from here and the valve continues to leak since it needs replaced, try connecting a garden hose to it and run the hose outdoors. With some luck, that could eliminate the water leaking inside.
Leak on the bottom of the tank
Any time the tank leaks from the bottom, it indicates a critical internal dilemma. On account of exactly how the water storage tank is made, being covered within insulation and having an outer skin, if it is leaking, it will probably not be seen from the exterior. An interior water leak normally is going to be observable in the bottom of the tank. The older the storage tank is, the more probable its starting to rust and degrade. A rusting tank will need to get replaced.
5. Will I need to have a repair or replacement water heater?
From our experience, we are able to perform a repair to take care of the leak, a lot more often then having to replace ones heater. The quicker we are able to examine the condition, the sooner we can accomplish a repair ahead of the damage getting any worse. We do really advise that any kind of repairs or replacements be carried out by a professional and not by yourself, to make certain they are carried out properly and up to code. Many times, manufacturer warranties can be voided when a non-licensed individual works on it.
When the water coming from the faucets at home smells bad, there might be a problem with your hot water heater. There might be multiple different causes of smelly water, however the leading reason is bacteria. If perhaps bacteria is entering into the water, a smell will more than likely come about. Well water is typically at fault for this developing. But, there are a few actions a Huntington Beach homeowner can take to stop bacteria from growing in their water and to eliminate existing bacteria and odors.
According to Soquel Creek Water District, “The smell is the result of four factors that must all be present for the odor to develop. These factors include:
- A high concentration of sulfate in the raw water
- Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
- Little or no dissolved oxygen in the water
- Hydrogen (a component of water which may be present due to water conditions reacting with the anode)” Read more here…
Controlling Water Heater Bacteria Growth
The best way to prevent bacteria from growing and bringing about awful tastes and odors in one’s home, is to make certain the temperature is set at 140 degrees or higher on one’s hot water heater. In this climate bacteria are not able to grow and will be killed. When your water heater temp is set any lower than this, bacteria will not only live but can grow.
In order to eliminate present bacteria and odors, one must apply chemicals to eliminate it. Chlorine bleach is the most effective and thorough chemical cleaner to use. In cases where you are making an attempt to decontaminate the water and remove the bacteria applying bleach yourself, make sure you have an understanding of the exact process of doing this. First of all, the electric or gas going to the water heater has to be turned off. After that the cold water supply will have to be turned off. Then, you must turn on one of the hot water faucets in the house. This allows air into the tank. Using a garden hose, drain the water from the water heater and shut the drain valve once all the water is drained. After this, it’s time to pour in the bleach. One will be needing five oz of chlorine bleach for each gallon of water the tank can hold. Unscrew the flexible cold water hose and pour the bleach in the opening. In the event that the cold water hose is not flexible, it may be a good idea to contact a professional. Attach the water line once again and fill up the tank with water. It is necessary to close the hot water spigot in the house as soon as all the air is out of the pipe. It is also vital to run all the faucets which use hot water throughout the property until you are able to smell the bleach. The bacteria that is inside the water heater could also be in water lines and fixtures consequently you should remove the bacteria in these areas also. Let the bleach water remain in the tank and inside the water lines for around 3 hours not having utilizing any hot water. Then yet another flush is due. As soon as the tank is drained for a second time, don’t put in more bleach but fill up with water and allow it to sit in the tank and inside the piping for at least thirty minutes. Lastly, drain the water again and then replenish the tank with water. Allow all of the hot water fixtures in the house run until you can not smell bleach. Either switch the power back on or relight the pilot light and you will be all set!
For any questions about water smells, flushing a water heater, Huntington Beach water heater repairs, or other water heater issues, give us a call!
Hot water heaters usually complete exactly what they’re supposed to accomplish and usually go unnoticed up to the point when one needs a Huntington Beach Water Heater Repair. Nevertheless, some of the problems which develop may be prevented with frequent maintenance by a specialist. Be sure to keep close track of your gas hot water heater, as a number of the problems that could appear may be costly and dangerous for family members and household pets. Here, we are detailing four signs that a gas water heater may have to be replaced.
In case there is water on the ground near your hot water heater or leaking out of a pipe, you might have to replace the water heater. However, based on exactly where the water can be found and the amount there is, you may be all right. If the water heater is dripping water from a pipe and there exists some water on the ground next to the unit, it is probably the T&P valve. The temperature and pressure valve removes extra steam in the hot water heater, this kind of steam becomes to water and comes out of the hot water heater by way of a pipe on the side of the unit. If this is the case, it is completely ordinary and important for the hot water heater to function adequately. Never attempt to shift the T&P valve and never block it. In the event that you might be worried about the volume of water that is coming from the pipe, contact a specialist! When the leaking water is coming from the underside of the tank, it is pretty much undoubtedly time to have a different hot water heater. When the water heater heats water the steel tank expands and contracts, this movement might lead to cracks and small fractures, that will eventually result in leaking. Once this takes place, it is time to buy a new system.
Around the piping coming from the water heater you can find pipe fittings that must be sealed tight in order to keep the pipe in place plus keep water from seeping out of the hole. Whenever you are noticing corrosion around these pipe fittings, water is getting out of the hole. Although this is not a big leak and is not going to bring about immediate damage to the hot water heater, in the event the issue is not fixed, significant and expensive problems can gradually appear.
In case you’re finding burn marks at the bottom of the water heater, there are actually 2 possible issues. However, each of them are really critical and both need a specialist. One issue may be with the venting. If the venting is clogged or had been installed incorrectly, it could cause the exhaust gases to come back in the property. This is unsafe and could lead to sickness or a fire when left unnoticed for long. Nevertheless, this might not signify you must upgrade the hot water heater, which is a good thing. Another potential issue with burn marks can be the flue pipes inside of the water heater are blocked. This can lead to a lot of hazardous concerns and, sadly, the hot water heater will have to be replaced as quickly as possible.
Yellowish Flame Color
Natural gas burning water heaters have got a blue flame under the tank if it is running. However, in the event that you are noticing that flame is an orange or yellow shade, instead of blue, the burner isn’t operating properly and will have to be looked over by a pro.
There are many complications that can show up with natural gas burning hot water heaters, but with regular care and yearly examinations, you can avoid the need for an unexpected water heater repair in Huntington Beach that can possibly be costly. Contact us today if you see something unusual with your hot water heater!
Water heaters are an out of sight, out of mind home appliance. Luckily they are usually created to be so. Even with hot water heaters currently in the marketplace being well built with energy efficiency in mind, there are things homeowners are able to do to stretch ones water heating energy bill even more.
Where to Lower Ones Huntington Beach Water Heating Expenses
If you haven’t seen the temperature level the hot water heater is established at, now could be a great time to do so. The manufacturer setting is often around 140 degrees. Most house owners do not require it to be set that high unless there are various health considerations one has. There is additional information on water heater temperature settings right here. Even turning down the temperature by 10°F can lower energy expenses by about $6 per month. The general homeowner does not have to set the water heater above 120°, so consider turning yours lower if it is.
Minimize Hot Water Usage
Here are some suggestions on how to minimize the hot water usage at home without having a lot of effect on how one lives.
Wash the majority of clothes in the washing machine in cold water: A large number of laundry detergents are intended for cold water use these days therefore make use of them.
Take showers as opposed to baths. Typically, baths use 12-15 gallons of water, while showers usually only use 5-9 gallons.
If renovating or updating sink faucets, add dual handle faucets. Single handle faucet make use of a little hot water when it is unnecessary. Even if the handle is moved straight up results in hot water to be made use of. Single handle faucets can help eliminate using hot water any time it is not needed.
Repair any water drips or leaks. We will not enter into detail in this article, but, even a small drip can add up to a sizeable quantity of water over the length of a month! Ensure to get every faucet drip mended at the earliest opportunity.
Adding Insulation to the Water Heater
It is sensible to insulate the water heater and the hot water pipes. Insulated covers can be bought to wrap the storage tank to keep the stored heated water hot. Todays water heaters are produced with superb built-in insulation of the water storage tank, yet every tiny bit may also help, notably if the water heater is found in a non-heated part of the house, such as a garage. All hot water pipes exiting the water heater should really be covered in pipe insulation too. This is especially very important for pipes that go through a garage, crawl space, or other area not warm.
Flush the Water Heater Regularly
House owners must make sure they are carrying out a little regular upkeep on the water heater to guarantee it runs as effortlessly as feasible. This will save on energy consumption and extend the life of the hot water heater. By flushing the storage tank and checking the anode rod should go far in accomplishing this.
Install a More Efficient Water Heater
As soon as it is time to get a new water heater, obtain one that is as energy efficient as you are able to get. Over time it is going to surely pay off!
If you have any concerns about a Huntington Beach water heater repair or even if you are uncertain whether it is getting close to requiring a new water heater, do not wait to contact us.
The Factors of a Water Heater Tank Explosion
With regards to needing to do maintenance on ones water heater, it is a rather low maintenance appliance. Nevertheless, one essential aspect of it should be checked out routinely. Water Heater Repair Huntington Beach wishes to pass along this safety information regarding ones water heater today.
High temperature if coupled with tank corrosion inside the storage tank might cause an explosion. Any time the water temperature is less than 212 degrees Fahrenheit, one will be protected from an explosion, though there is a associated risk of scalding at that temperature. But, if the water temperature is greater than 212 degrees, water transforms into steam, which will enlarge to 1,700 times the space it occupies as water. This is the time an explosion can happen.
Cautionary Signals of a Water Heater Explosion
The leading sign is if one goes to get hot water from a faucet and only steam comes out. Immediately turn off power if one possesses an electric water heater. If one has a gas hot water heater, turn off the gas valve on the water heater. Next, get in touch with us to come evaluate the predicament.
Minimizing Potential Water Heater Dangers
The most crucial upkeep job with a water heater is to examine the pressure relief valve, also referred to as the T&P valve, on a standard schedule. This valve helps control the pressure buildup inside of the water storage tank to reduce a dangerous rise in temperature and overpressure.
Be careful, the water release coming from a T&P valve might be really hot. If you do not feel comfortable testing the valve let us know. Also, carrying out any type of fixes to the valve should be performed by a experienced plumbing repair company.
How to Test the T&P Valve
Remove anything from around the space around the overflow pipe and floor drain.
Lift the test handle for approximately 5 seconds or until the water runs clear.
Release the handle.
If the T&P valve continues to run with water, raise the handle up and down quickly to get it to reseat itself. One may need to do so a several times. IF it has not been tested for a while, it might be difficult to raise it at first. Avoid using too much force, but may need to make use of just a little.
If the T&P valve continues to have water coming out, it should be replaced.
Other items to watch out for are corrosion on the stem of the valve. If there is any water dripping out of the valve stem or from the drain valve.
Water Heater Maintenance Infographic
Related T&P Valve Testing Videos
Mythbusters did a test of the potential dangers of hot water heater explosions here:
What the Experts Say
- The discharge from a T&P valve can be very hot. It is very important that all T&P valves be installed properly with a discharge line piped downward to an adequate drain to avoid property damage and to minimize possible human contact.
Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. If you have a large leak or the drip doesn’t stop on its own in a day or two, the valve will need to be replaced. Read more…
Check out some of our other water heater tips in our blog
We absolutely love taking care of Water Heater Heater Repairs in Huntington Beach and have enjoyed assisting as many of our community members. Come back here in our blog for we will continue to include tips on water heater maintenance and overall care.
We wish to pass along our new company overview video with you today.
We are also accessible to support you with all other kinds of plumbing repair you might require done. Be it a leaking faucet, drain cleaning, toilet repair, or leak detection. We have seen just about any kind of emergency plumbing and water heater repair predicament you can imagine and look forward to employing our well crafted troubleshooting skills!
If it happens to be near to the time for a water heater replacement inform us so we can help with deciding upon the greatest type of water heater for your property or office.